JMT Rhino IronWorkers

The JMT “Rhino” — that name says it all!

The microwave of the kitchen, the Swiss army knife of the campsite, the impact wrench of the auto shop, about the only thing these marvelous machines can’t do is plow snow! You know what we say around our shop? “Mess with the Rhino and you’ll get the horn!” The Rhino series of JMT’s ironworkers are very aptly named. With massive frames and tables, everything about these machines screams out Heavy Duty! With overweight — sometimes 1 ½ to 2 inch thick — components, gigantic hydraulic rams, over-capacity work stations, and deep throats, production is spoken here.

JMT Rhino series Hydraulic Ironworkers are designed with multi-functionality in mind to save labor, time, energy, and cost. JMT Ironworkers are well engineered, efficient and optimized for long life, using state of the art manufacturing methods and precision tolerances. These universal machines are supplied with standard tooling including X,Y gauging, support tables at punch, shear, and notch stations. There are easily adjusted hold downs at all five work stations to improve both productivity and safety. Each work station is equipped with specially designed hold downs to ensure safety while providing precision alignment and ease of use.

JMT Rhino series of single cylinder ironworkers have all the standard features found on their larger IW series cousins, but at even more affordable prices. Available in 55 and 90 ton punching capacities, these sleek machines feature four workstations offering a variety of applications such as bending, punching, bar shearing, plate shearing, angle shearing and coping-notching. Considering all this capability, the actual foot print of these machines is minimal, packing a lot of capability into a small amount of floor space.

Standard features abound on this line of ironworkers. Listen to this lineup: complete punching attachment with stripper, automatic urethane hold-downs on angle, plate, and bar shearing. Fixed hold downs for flat bar and angle iron shearing. Bending attachment is 8 inch on the 55 ton model and 12 inch on the 90 ton model. Punch and die set consists of 14 pieces with the 55 ton model and 5 pieces with the 90 ton model. These machines also incorporate a 36 inch manual back gauge for plate and angle iron shearing. Front and rear 5 position joy stick control with jog up, jog down, fast up and down and neutral. Coupling wrench, lifting lug, extra oil filter, two chip/scrap buckets, remote electric foot switch which can be connected at either end of the machine.

Featured:

90 TON HYDRAULIC IRONWORKER

MODEL R-90

SPECIFICATIONS (Mild Steel)

  • Punching: 1 1/8″ diameter through 1″ plate
  • Throat Depth: 12″
  • Bending: 12″ w/4-way die block
  • Round Bar Shear: 1/2″ through 2″
  • Square Bar Shear: 1/2″ through 1-3/8″
  • Plate Shear: 20″ x 1/2″, 18″ x 3/4″, 12″ x 1″
  • Angle Shear: 6″ x 6″ x 5/8″
  • Coping/Notching: 4″ x 6″ x 3/8″ blade
  • Motor: 15 HP
  • Weight: 5,800 Lbs.

STANDARD EQUIPMENT

  • Automatic Hold Downs
  • Punch Holder, Stripper and Die Block
  • 5 Punch & Die Sets 9/16″ through 1-1/16″
  • 12″ Bending w/4-Way Die Block
  • Set of 1 1/4″ Round Bar Knives
  • Set of 16-5/8″ Plate Shear Knives
  • Set of Coper Knives
  • Set of Angle Knives
  • Coupling Wrench
  • 3/8″ Allen Wrench
  • Set of Chip Buckets
  • Extra Filter Element
  • Foot Switch
  • Instruction/Parts Book/Video

The JMT Rhino R-90 ironworker comes standard with high speed hydraulics, which includes a higher horsepower motor, allowing for faster cycle times and faster parts production. It comes standard with polyurethane hold downs for less material distortion during punching and cutting. Operators can cope, notch and trim materials of various thicknesses from any angle. The shearing station has quick hold down adjustment for different material thicknesses. The punch station is equipped with a quick release “dovetail” clamping system allowing quick changeover from a punch to a small press brake attachment.

To view/download brochures for this product,
please log in or register.




Log In

Registration

A password will be e-mailed to you.