Kuraki CMN Series

The Only Machine That Can Perform Speedy Vertical and Horizontal Machining Operations.

  • Both the vertical and horizontal spindles ensure high-accuracy and right-angle machining in one setup.
    *Both the vertical and horizontal spindle interference areas are excluded.
  • Optional rotary table achieves simple 5-axis machining in one setup.
  • Space is saved by the chip disposal system with three big openings of a chip conveyor exiting on the side of the machine parallel to the X axis for a larger amount of chip disposal.
  • Floor space is saved by a chip conveyor exiting on the side of the machine parallel to the X axis. The three big openings archive a larger amount of chip disposal.

Greater Job Efficiency by Both Vertical and Horizontal Spindles

The horizontal spindle (quill-feeding type with high operability and accessibility to the workpiece) can travel to the top of the table. The vertical spindle can optionally have 6000 rpm and a toolchanger.

CMN-5C Standard Specifications

*For specifications of KGD-1411Z and KGD-2013, inquire with our Sales Department.

Stroke X axis travel (table cross) mm (inch) 2000 (78.74)
Y axis travel (table longitudinal) mm (inch) 640 (25.20)
Z axis travel (Vertical head vertical) mm (inch) 850 (33.46)
Distance from table top to vertical spindle end mm (inch) 150~1000 (5.91×39.37)
Distance from column front to vertical spindle center mm (inch) 700 (27.56)
W axis travel (Horizontal head vertical) mm (inch) 1050 (41.34)
Distance from table top to horizontal spindle center mm (inch) 0~1050 (0~41.34)
Distance from vertical spindle center to horizontal spindle center mm (inch) 310 (12.20)
Table Table work space mm (inch) 2500×600 (98.42×23.62)
Table maximum loading capacity kg (lbs) 2000 (4400)
Table top profile mm (inch) 22 (0.87) 5T slots
Spindle Head Spindle taper 7/24 Taper No.50
Spindle speed(for every 1min-1 min-1 20~3000
Quill Quill diameter (Horizontal Head Only) mm (inch) 200 (7.87)
Quill travel (Horizontal Head Only) mm (inch) 120 (4.72) manual
Feed Rapid traverse (X・Y・Z・W) m (inch)/min 12 (472.44)
Feedrate (X・Y・Z・W) mm (inch)/min 1~6000 (0.04~236.22)
Automatic Tool Changer (ATC) Tool shank MAS BT50
Pull stud MAS P50T-1(45°)
Tool storage capacity pc 32
Max. tool diameter [vacant adjacent pots] mm (inch) 110 (4.33) [200(7.87)]
Max. tool length mm (inch) 350 (13.78)
Max. tool weight kg (lbs) 20 (44)
Tool selection At random
Motors Spindle motor kW (HP) AC15 (20)(30 min)/11(15)(cont.) 2 pcs
Feed motor kW (HP) X・Y・Z・W:AC3.0 (4.0)
Voltage Power capacity(Not incl. opt) kVA 40.9
Air pressure source pressure MPa 0.5
Air pressure source flow (Not incl. opt) NL/min 400(atm)
Dimensions Machine height mm (inch) 3520 (138.58)
Floor space (Not incl. opt) mm (inch) 6200×4000 (244.09×157.48)
Machine weight(Incl. NC unit) kg (lbs) 16500 (36300)