JMT PBM Series Angle Rolls
JMT PBM Series Profile Angle Rolls
Profile Bending Rolls
When it comes to tough well-built compact machines, JMT rings the bell with the JMT-PBM 30 and JMT- PBM50. Although these two little powerhouses are very inexpensive to purchase, they are every bit an everyday production capable piece of equipment. These two profile bending rolls start out life with an overly heavy duty welded fabrication steel frame which is stress relieved, and re-heat treated prior to machining. Once the frames are normalized they are completely machined in a single production jig, so the utmost rigidity is obtained.
The PBM-30 and PBM-50 have all the features you would expect in an entry level production profile bender and possibly a couple more you might not. The basis of a tough profile bender begins in the shafts, bearings and rolls. The JMT machines utilize B52100 Bearing Steel heat treated, annealed and ground to 52-54 Rc. These tough spindles drive their respective rolls journaled in dual self-aligning spherical roller bearings for optimum performance and long service life. Both of these profile bending machines employ fan cooled world class electric drive motors, gear sets and main electrical components. Not only for long service life, but so, many years down the road they may be sourced locally by the owners as components become needed. Both of these mini-heavyweights have top roll manual adjustment via crank bar, mechanical lateral guide rolls, and can be utilized in either a horizontal or vertical orientation. Both machines achieve shorter cycle times due to increased drive train torque and increased roll speeds. The PBM 30 and 50 both have standalone operator’s panels with large easy to use emergency stop switches for increased safety. As if the standard features weren’t enough JMT stands behind these high output benders with an options list which includes, blank roll, for machining into specific profiles, special supports for angles, a user friendly bar twisting device, digital readout, wired or wireless remote, infinitely variable speed drive or a double speed main motor.
As always JMT supports the PBM motorized angle roll with a full complement of spare parts and yes our 50 plus years of advising and serving our customers.
JMT-PBM50 Profile Angle Roller
When you need enhanced bending capacity, the JMT-PBM50 offers many of the same features of the PBM 30 with an extra boost of power. It is mechanically powered and has a slightly larger shaft diameter of 1.97” for easy insertion of materials. It has a roll diameter of 6” and can bend materials with diameters as little as 16” in regard to squares measuring 1 3/8” x 1 3/8”. Similar to the PBM 30 it supports most other profile types such as angled, flat, square, round, pipes and more. The PM50 is a great solution for a wide diversity of bending needs that range from small to large.
Shaft Diameters: 2″
Roll Diameters: 6.1″
Motor Power: 2 HP
Turning Speed: 0 – 12 FPM
Dimensions: 37″ L x 29″ W x 56″ H
Weight: 957 lbs.
– Standard universal rolls
– Hardened rolls
– Mechanical lateral guide rolls
– Horizontal and vertical operation
– Foot pedal with safety device
– Compliant with CE norms regulations
– Special rolls for tubes, profiles, cap rail, etc.
– Special support rolls for angles
– Special bar twist device
– Digital read out
– Remote (wired or wireless)