Notching aluminum profiles often requires cuts on more than one face and at more than one angle. The PMI-LJK 500NC Notching Saw brings those operations together with vertical and horizontal cutting capability controlled through an NC system. Servo-controlled angle positioning adds flexibility for changing notch geometry, giving manufacturers a dedicated platform for preparing aluminum extrusions and profiles before assembly, welding, or other downstream operations.
PMI-LJK 500NC Notching Saw Features:
The PMI-LJK 500NC is an automatic aluminum profile notching saw developed for production work where profiles require material to be removed before joining or assembly. Rather than treating each notch as a separate manual setup, the machine brings controlled positioning and cutting functions into a dedicated notching platform for recurring aluminum extrusion work.
Different profile designs can require access to more than one surface of the workpiece. The NC vertical horizontal profile notcher provides both cutting orientations within the same machine, expanding the range of notch configurations that can be produced without transferring the extrusion between separate saws or setups.
Angle positioning adds another level of control when the required notch is not limited to a basic square cut. As a servo angle aluminum notch saw, the PMI-LJK 500NC uses controlled angular positioning to accommodate changing profile geometry and notch requirements. This makes the machine particularly useful for recurring components where notch location and angle need to remain consistent across a production run.
| Specification | Value |
| Machine Type | NC aluminum profile notching saw |
| Blade Arrangement | Vertical and horizontal |
| Vertical Blade | 26 in published |
| Horizontal Blade | 20 in published |
| Saw Motors | 3 HP x 2 |
| Blade Speed | 2,800 RPM |
| Standard Cutting Capacity | Approximately 6 x 6 in |
