PMI-18 DB-Type Fully Automatic Upcut Saw

Servo Indexing Controls the Automatic Cut Cycle

The PMI-18 DB-Type integrates material positioning directly into the machine cycle rather than relying on a manually adjusted length stop. As a servo indexing aluminum upcut saw, it automatically advances stock to the programmed length before clamping and cutting. This coordinated process supports recurring cutoff work where consistent dimensions and reduced operator handling are important to production.

Dedicated 90° Cutting for Nonferrous Profiles

A 7.5 HP motor drives the 18-inch blade at 3,200 RPM, with cutting capacity up to 4.33 inches high and 11.81 inches wide. The fixed cutting configuration makes the PMI-18 DB-Type a 90 degree nonferrous production saw for blanks, extrusion sections, and other components that require square ends. Without miter positioning between cuts, the machine remains focused on automatic straight-cut production.

Controlled Clamping for Aluminum Extrusions

Vertical and horizontal clamps secure the material during the upcut stroke, while adjustable pressure helps accommodate both substantial stock and thinner-wall profiles. Air-over-oil feed controls blade advancement through the workpiece, and the touchscreen provides the operator interface for the automatic cycle. Together with servo material indexing, these features give the automatic aluminum extrusion cutoff saw a controlled workflow for repeat production of nonferrous parts.